Deskripsi Produk
The Knife sharpener uses pres-set crossed crabide blades and ceramic stones to sharpen all cutley, form pocket/sport knives to kitchen knives. The specially shaped ceramic stones can be uesd on their standard or SERRATED edges. It has an ergonomically design soft grip handle and non slip spray plastics ( spray coating or chemistry treatment) feet for comfort and safety. Just 3 or 4 pulls throught the sharpening slots is all it takes to create the PERFECT EDGE every time.
Sharpening slots (23″ angle)
-carbides (coarse)-Provide quick edge setting capabilitty for very dull or damaged blades
-Ceramic (fine) – remove very little metal. Excellent for finishing and mainstaing an alreday shrap blade
reversible and replaceable carbide blades and ceramic stones
When the blades and/or stones stop removing metal from the knife blade, the can ber rotated to used the other side or replaecd. To rotate or replace, remove the two scerws and plastic cover. Remove the blades or stones. Rotate 180 degrees. Place the top carbide blade/ceramic stone into the bottom slot and the bottom carbide blade/ceramic stone into the top slot. Replace the cover and two screws.
Sharpening Instruction :
Place knife sharpener on a flat surface
insert knife blade into the appropriate sharpening slot as shown (Fig.1)
While applying downward pressure, pull the knife blade throught the sharpening slot, allowing the knife blade to glide over the carbide blades or ceramic stones (fig2) Repeat 3 or 4 times or until knife is sharp
Care & use
Always you shrapener after use. Clean with a damp cloth or small brush
Do not rinse with water
Design Features:
-Soft-grips spray plastics handle
-Non-slip spray plastic feet
-Pres set sharpening angel
-Reversible and replaceable
-Blades and stone